Anaerobic fixed-target serial crystallography using sandwiched silicon nitride membranes.

In recent years, the emergence of serial crystallography, initially pioneered at X-ray free-electron lasers (XFELs), has sparked a growing interest in collecting macromolecular crystallographic data at room temperature. Various fixed-target serial crystallography techniques have been developed, ranging from commercially available chips to in-house designs implemented at different synchrotron facilities. Nevertheless, there is currently no commercially available chip (known to the authors) specifically designed for the direct handling of oxygen-sensitive samples. This study presents a methodology employing silicon nitride chips arranged in a `sandwich' configuration, enabling reliable room-temperature data collection from oxygen-sensitive samples. The method involves the utilization of a custom-made 3D-printed assembling tool and a MX sample holder. To validate the effectiveness of the proposed method, deoxyhemoglobin and methemoglobin samples were investigated using the BioMAX X-ray macromolecular crystallography beamline, the Balder X-ray absorption spectroscopy beamline and UV-Vis absorption spectroscopy.

Kilohertz serial crystallography with the JUNGFRAU detector at a fourth-generation synchrotron source.

Serial and time-resolved macromolecular crystallography are on the rise. However, beam time at X-ray free-electron lasers is limited and most third-generation synchrotron-based macromolecular crystallography beamlines do not offer the necessary infrastructure yet. Here, a new setup is demonstrated, based on the JUNGFRAU detector and Jungfraujoch data-acquisition system, that enables collection of kilohertz serial crystallography data at fourth-generation synchrotrons. More importantly, it is shown that this setup is capable of collecting multiple-time-point time-resolved protein dynamics at kilohertz rates, allowing the probing of microsecond to second dynamics at synchrotrons in a fraction of the time needed previously. A high-quality complete X-ray dataset was obtained within 1 min from lysozyme microcrystals, and the dynamics of the light-driven sodium-pump membrane protein KR2 with a time resolution of 1 ms could be demonstrated. To make the setup more accessible for researchers, downstream data handling and analysis will be automated to allow on-the-fly spot finding and indexing, as well as data processing.

Fast, automated, continuous energy scans for experimental phasing at the BioMAX beamline.

In X-ray macromolecular crystallography (MX), single-wavelength anomalous dispersion (SAD) and multi-wavelength anomalous dispersion (MAD) techniques are commonly used for obtaining experimental phases. For an MX synchrotron beamline to support SAD and MAD techniques it is a prerequisite to have a reliable, fast and well automated energy scan routine. This work reports on a continuous energy scan procedure newly implemented at the BioMAX MX beamline at MAX IV Laboratory. The continuous energy scan is fully automated, capable of measuring accurate fluorescence counts over the absorption edge of interest while minimizing the sample exposure to X-rays, and is about a factor of five faster compared with a conventional step scan previously operational at BioMAX. The implementation of the continuous energy scan facilitates the prompt access to the anomalous scattering data, required for the SAD and MAD experiments.

Current status and future opportunities for serial crystallography at MAX IV Laboratory.

Over the last decade, serial crystallography, a method to collect complete diffraction datasets from a large number of microcrystals delivered and exposed to an X-ray beam in random orientations at room temperature, has been successfully implemented at X-ray free-electron lasers and synchrotron radiation facility beamlines. This development relies on a growing variety of sample presentation methods, including different fixed target supports, injection methods using gas-dynamic virtual-nozzle injectors and high-viscosity extrusion injectors, and acoustic levitation of droplets, each with unique requirements. In comparison with X-ray free-electron lasers, increased beam time availability makes synchrotron facilities very attractive to perform serial synchrotron X-ray crystallography (SSX) experiments. Within this work, the possibilities to perform SSX at BioMAX, the first macromolecular crystallography beamline at  MAX IV Laboratory in Lund, Sweden, are described, together with case studies from the SSX user program: an implementation of a high-viscosity extrusion injector to perform room temperature serial crystallography at BioMAX using two solid supports - silicon nitride membranes (Silson, UK) and XtalTool (Jena Bioscience, Germany). Future perspectives for the dedicated serial crystallography beamline MicroMAX at MAX IV Laboratory, which will provide parallel and intense micrometre-sized X-ray beams, are discussed.

BioMAX - the first macromolecular crystallography beamline at MAX IV Laboratory.

BioMAX is the first macromolecular crystallography beamline at the MAX IV Laboratory 3 GeV storage ring, which is the first operational multi-bend achromat storage ring. Due to the low-emittance storage ring, BioMAX has a parallel, high-intensity X-ray beam, even when focused down to 20 µm × 5 µm using the bendable focusing mirrors. The beam is tunable in the energy range 5-25 keV using the in-vacuum undulator and the horizontally deflecting double-crystal monochromator. BioMAX is equipped with an MD3 diffractometer, an ISARA high-capacity sample changer and an EIGER 16M hybrid pixel detector. Data collection at BioMAX is controlled using the newly developed MXCuBE3 graphical user interface, and sample tracking is handled by ISPyB. The computing infrastructure includes data storage and processing both at MAX IV and the Lund University supercomputing center LUNARC. With state-of-the-art instrumentation, a high degree of automation, a user-friendly control system interface and remote operation, BioMAX provides an excellent facility for most macromolecular crystallography experiments. Serial crystallography using either a high-viscosity extruder injector or the MD3 as a fixed-target scanner is already implemented. The serial crystallography activities at MAX IV Laboratory will be further developed at the microfocus beamline MicroMAX, when it comes into operation in 2022. MicroMAX will have a 1 µm × 1 µm beam focus and a flux up to 1015 photons s-1 with main applications in serial crystallography, room-temperature structure determinations and time-resolved experiments.

Vibrational stability of a cryocooled horizontal double-crystal monochromator.

The vibrational stability of a horizontally deflecting double-crystal monochromator (HDCM) is investigated. Inherently a HDCM will preserve the vertical beam stability better than a `normal' vertical double-crystal monochromator as the vibrations of a HDCM will almost exclusively affect the horizontal stability. Here both the relative pitch vibration between the first and second crystal and the absolute pitch vibration of the second crystal are measured. All reported measurements are obtained under active cooling by means of flowing liquid nitrogen (LN2). It is found that it is favorable to circulate the LN2 at high pressures and low flow rates (up to 5.9 bar and down to 3 l min(-1) is tested) to attain low vibrations. An absolute pitch stability of the second crystal of 18 nrad RMS, 2-2500 Hz, and a relative pitch stability between the two crystals of 25 nrad RMS, 1-2500 Hz, is obtained under cryocooling conditions that allow for 1516 W to be adsorbed by the LN2 before it vaporizes.

The macromolecular crystallography beamline I911-3 at the MAX IV laboratory.

The macromolecular crystallography beamline I911-3, part of the Cassiopeia/I911 suite of beamlines, is based on a superconducting wiggler at the MAX II ring of the MAX IV Laboratory in Lund, Sweden. The beamline is energy-tunable within a range between 6 and 18 keV. I911-3 opened for users in 2005. In 2010-2011 the experimental station was completely rebuilt and refurbished such that it has become a state-of-the-art experimental station with better possibilities for rapid throughput, crystal screening and work with smaller samples. This paper describes the complete I911-3 beamline and how it is embedded in the Cassiopeia suite of beamlines.

The role of Tyr41 and His155 in the functional properties of superoxide dismutase from the archaeon Sulfolobus solfataricus.

We have examined and compared the effects of mutating Y41 and H155 in the iron superoxide dismutase (SOD) from the archaeon Sulfolobus solfataricus (Ss). These two neighboring residues in the active site are known to have crucial functions in structurally related SODs from different sources. The metal analysis indicates a slightly lower iron content after either Y41F or H155Q replacement, without any significant substitution of iron for manganese. The specific activity of SsSOD referred to the iron content is 17-fold reduced in the Y41F mutant, whereas it is less than 2-fold reduced by the H155Q mutation. The noticeable pH dependence of the activity of SsSOD and H155Q-SsSOD, due to the ionization of Y41 (pK 8.4), is lost in Y41F-SsSOD. After H155Q and even more after the Y41F substitution, the archaeal enzyme acquires a moderate sensitivity to sodium azide inhibition. The hydrogen peroxide inactivation of SsSOD is significantly increased after H155Q replacement; however, both mutants are insensitive to the modification of residue 41 by phenylmethanesulfonyl fluoride. Heat inactivation studies showed that the high stability of SsSOD is reduced by the H155Q mutation; however, upon the addition of SDS, a much faster inactivation kinetics is observed both with wild-type and mutant SsSOD forms. The detergent is also required to follow thermal denaturation of the archaeal enzyme by Fourier transform infrared spectroscopy; these studies gave information about the effect of mutations and modification on flexibility and compactness of the protein structure. The crystal structure of Y41F mutant revealed an uninterrupted hydrogen bond network including three solvent molecules connecting the iron-ligating hydroxide ion via H155 with F41 and H37, which is not present in structures of the corresponding mutant SODs from other sources. These data suggest that Y41 and H155 are important for the structural and functional properties of SsSOD; in particular, Y41 seems to be a powerful regulator of the activity of SsSOD, whereas H155 is apparently involved in the organization of the active site of the enzyme.

Cryophotolysis of caged compounds: a technique for trapping intermediate states in protein crystals.

Caged compounds in combination with protein crystallography represent a valuable tool in studies of enzyme reaction intermediates. To date, photochemical triggering of reactions has been performed close to room temperature. Synchronous reaction initiation has only been achieved with enzymes of relatively slow turnover (<0.1 s(-1)) and caged compounds of high quantum yield. Here X-ray crystallography and microspectrophotometry were used to provide evidence that (nitrophenyl)ethyl (NPE) ester bonds can be photolyzed by UV light at cryotemperatures. NPE-caged ATP in flash-cooled crystals of Mycobacterium tuberculosis thymidylate kinase was photolyzed successfully at 100-150 K as assessed by the structural observation of ATP-dependent enzymatic conversion of TMP to TDP after temporarily warming the crystals to room temperature. A new method is proposed in which cryo-photolysis combined with temperature-controlled protein crystallography can be used to trap reaction intermediates even in some of the fastest enzymes and/or when only compounds of low quantum yield are available. Raising the temperature after cryophotolysis may allow a transition barrier to be passed and an intermediate to accumulate in the crystal. A comparable method has only been used so far with proteins displaying endogenous photosensitivity. The approach described here opens the way to studying the reaction mechanisms of a much larger number of crystalline enzymes. Furthermore, it is shown that X-ray-induced radiolysis of caged compounds occurs if high-intensity synchrotron beamlines are used. This caveat should be taken into account when deriving data-collection protocols. It could also be used potentially as a way to trigger reactions.